Virnig | V60 Skeleton Rock Grapple (SSL) (CTL)
Experience robust rock and debris handling with the Virnig V60 Skeleton Rock Grapple (SSL) for skid steers. Designed for loaders over 1800 lbs ROC, this dual-jaw attachment grips uneven loads with steady, independent control, making site cleanup faster and more precise.
- Independent Dual Jaw Design: Two separate hydraulic cylinders power each jaw, allowing true independent action for uneven loads and secure clamping during transport.
- 2.0" Bore / 8.375" Stroke Cylinders: Generous bore and stroke deliver strong, consistent pressure across a wide range of debris and rock sizes.
- 4.0" Tine Spacing: Optimized to grab rocks and debris while leaving dirt behind, improving sorting and loading efficiency.
- One-Piece 1/2" Grade 80 Steel Tines: Tines welded from tip to top brace for maximum rigidity and long service life in tough work environments.
- Raised Rock Dam Center Ridge: The raised center ridge and tip notches help secure rocks during digging and transport, reducing slippage.
- NitroSteelĀ® Cylinder Rods: Corrosion-, dent- and flake-resistant rods extend cylinder life in dirty, abrasive job sites.
- TeflonĀ®-Coated Bushings: Low-friction bushings provide smooth pivoting and reduce wear at all motion points.
- Greasable Pins: 1Ā¼" cylinder pins and 1ā " hinge pins are greaseable for easier maintenance and longer component life.
- Machine-Specific Hydraulic Package: Optimized hose routing protects connections and enhances reliability on compatible skid steers.
- Removable Bolt-On Step: Durable, laser-cut steel step with an aggressive pattern for safe, convenient access to the bucket.
- Standard Cylinder Guards: Built-in protection helps shield cylinders from damage in rugged environments; open sides are optional for added visibility and access.
- Included Hoses, Couplers & Fittings: Universal skid steer mounting kit arrives ready to install, minimizing setup time.
- Model Variants & Key Specs: Available in HSRGV72, HSRGV78, HSRGV84, and HSRGV90 configurations to fit 73.5"ā91.5" wide buckets with consistent 36.1" jaw opening.
Four width options span 73.5" to 91.5" overall, with a consistent 42.9" depth and 27.8" overall height (bucket height 21.5"). Depending on the model, youāll find a jaw count ranging from 17 to 21 tines, each loaded to handle heavy rock and debris while maintaining a controlled load. Weight ranges from 1080 to 1205 lbs, balancing durability with maneuverability on a variety of skid steers. The setup is ideal for rock removal, site cleanup, demolition debris, and rocky earthmoving where a tight, secure grip is essential.
| Model | HSRGV72 | HSRGV78 | HSRGV84 | HSRGV90 |
| Overall Width (in) | 73.5 | 79.5 | 85.5 | 91.5 |
| Depth (in) | 42.9 | 42.9 | 42.9 | 42.9 |
| Height: Overall / Bucket (in) | 27.8 / 21.5 | 27.8 / 21.5 | 27.8 / 21.5 | 27.8 / 21.5 |
| Grapple Jaw Opening (in) | 36.1 | 36.1 | 36.1 | 36.1 |
| Number of Tines | 17 | 18 | 20 | 21 |
| Space Between Tines | 4.0 | 4.1 | 3.9 | 4.0 |
| Weight (lbs) | 1080 | 1115 | 1170 | 1205 |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Virnig | V60 Skeleton Rock Grapple (SSL) (CTL)
Virnig | V60 Skeleton Rock Grapple (SSL) (CTL)
Experience robust rock and debris handling with the Virnig V60 Skeleton Rock Grapple (SSL) for skid steers. Designed for loaders over 1800 lbs ROC, this dual-jaw attachment grips uneven loads with steady, independent control, making site cleanup faster and more precise.
- Independent Dual Jaw Design: Two separate hydraulic cylinders power each jaw, allowing true independent action for uneven loads and secure clamping during transport.
- 2.0" Bore / 8.375" Stroke Cylinders: Generous bore and stroke deliver strong, consistent pressure across a wide range of debris and rock sizes.
- 4.0" Tine Spacing: Optimized to grab rocks and debris while leaving dirt behind, improving sorting and loading efficiency.
- One-Piece 1/2" Grade 80 Steel Tines: Tines welded from tip to top brace for maximum rigidity and long service life in tough work environments.
- Raised Rock Dam Center Ridge: The raised center ridge and tip notches help secure rocks during digging and transport, reducing slippage.
- NitroSteelĀ® Cylinder Rods: Corrosion-, dent- and flake-resistant rods extend cylinder life in dirty, abrasive job sites.
- TeflonĀ®-Coated Bushings: Low-friction bushings provide smooth pivoting and reduce wear at all motion points.
- Greasable Pins: 1Ā¼" cylinder pins and 1ā " hinge pins are greaseable for easier maintenance and longer component life.
- Machine-Specific Hydraulic Package: Optimized hose routing protects connections and enhances reliability on compatible skid steers.
- Removable Bolt-On Step: Durable, laser-cut steel step with an aggressive pattern for safe, convenient access to the bucket.
- Standard Cylinder Guards: Built-in protection helps shield cylinders from damage in rugged environments; open sides are optional for added visibility and access.
- Included Hoses, Couplers & Fittings: Universal skid steer mounting kit arrives ready to install, minimizing setup time.
- Model Variants & Key Specs: Available in HSRGV72, HSRGV78, HSRGV84, and HSRGV90 configurations to fit 73.5"ā91.5" wide buckets with consistent 36.1" jaw opening.
Four width options span 73.5" to 91.5" overall, with a consistent 42.9" depth and 27.8" overall height (bucket height 21.5"). Depending on the model, youāll find a jaw count ranging from 17 to 21 tines, each loaded to handle heavy rock and debris while maintaining a controlled load. Weight ranges from 1080 to 1205 lbs, balancing durability with maneuverability on a variety of skid steers. The setup is ideal for rock removal, site cleanup, demolition debris, and rocky earthmoving where a tight, secure grip is essential.
| Model | HSRGV72 | HSRGV78 | HSRGV84 | HSRGV90 |
| Overall Width (in) | 73.5 | 79.5 | 85.5 | 91.5 |
| Depth (in) | 42.9 | 42.9 | 42.9 | 42.9 |
| Height: Overall / Bucket (in) | 27.8 / 21.5 | 27.8 / 21.5 | 27.8 / 21.5 | 27.8 / 21.5 |
| Grapple Jaw Opening (in) | 36.1 | 36.1 | 36.1 | 36.1 |
| Number of Tines | 17 | 18 | 20 | 21 |
| Space Between Tines | 4.0 | 4.1 | 3.9 | 4.0 |
| Weight (lbs) | 1080 | 1115 | 1170 | 1205 |
Original: $7,010.00
-65%$7,010.00
$2,453.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Experience robust rock and debris handling with the Virnig V60 Skeleton Rock Grapple (SSL) for skid steers. Designed for loaders over 1800 lbs ROC, this dual-jaw attachment grips uneven loads with steady, independent control, making site cleanup faster and more precise.
- Independent Dual Jaw Design: Two separate hydraulic cylinders power each jaw, allowing true independent action for uneven loads and secure clamping during transport.
- 2.0" Bore / 8.375" Stroke Cylinders: Generous bore and stroke deliver strong, consistent pressure across a wide range of debris and rock sizes.
- 4.0" Tine Spacing: Optimized to grab rocks and debris while leaving dirt behind, improving sorting and loading efficiency.
- One-Piece 1/2" Grade 80 Steel Tines: Tines welded from tip to top brace for maximum rigidity and long service life in tough work environments.
- Raised Rock Dam Center Ridge: The raised center ridge and tip notches help secure rocks during digging and transport, reducing slippage.
- NitroSteelĀ® Cylinder Rods: Corrosion-, dent- and flake-resistant rods extend cylinder life in dirty, abrasive job sites.
- TeflonĀ®-Coated Bushings: Low-friction bushings provide smooth pivoting and reduce wear at all motion points.
- Greasable Pins: 1Ā¼" cylinder pins and 1ā " hinge pins are greaseable for easier maintenance and longer component life.
- Machine-Specific Hydraulic Package: Optimized hose routing protects connections and enhances reliability on compatible skid steers.
- Removable Bolt-On Step: Durable, laser-cut steel step with an aggressive pattern for safe, convenient access to the bucket.
- Standard Cylinder Guards: Built-in protection helps shield cylinders from damage in rugged environments; open sides are optional for added visibility and access.
- Included Hoses, Couplers & Fittings: Universal skid steer mounting kit arrives ready to install, minimizing setup time.
- Model Variants & Key Specs: Available in HSRGV72, HSRGV78, HSRGV84, and HSRGV90 configurations to fit 73.5"ā91.5" wide buckets with consistent 36.1" jaw opening.
Four width options span 73.5" to 91.5" overall, with a consistent 42.9" depth and 27.8" overall height (bucket height 21.5"). Depending on the model, youāll find a jaw count ranging from 17 to 21 tines, each loaded to handle heavy rock and debris while maintaining a controlled load. Weight ranges from 1080 to 1205 lbs, balancing durability with maneuverability on a variety of skid steers. The setup is ideal for rock removal, site cleanup, demolition debris, and rocky earthmoving where a tight, secure grip is essential.
| Model | HSRGV72 | HSRGV78 | HSRGV84 | HSRGV90 |
| Overall Width (in) | 73.5 | 79.5 | 85.5 | 91.5 |
| Depth (in) | 42.9 | 42.9 | 42.9 | 42.9 |
| Height: Overall / Bucket (in) | 27.8 / 21.5 | 27.8 / 21.5 | 27.8 / 21.5 | 27.8 / 21.5 |
| Grapple Jaw Opening (in) | 36.1 | 36.1 | 36.1 | 36.1 |
| Number of Tines | 17 | 18 | 20 | 21 |
| Space Between Tines | 4.0 | 4.1 | 3.9 | 4.0 |
| Weight (lbs) | 1080 | 1115 | 1170 | 1205 |
